Glossary

 AFUE Annualized Fuel Utilization Efficiency is a measure of your furnace’s heating efficiency. The higher the AFUE percentage, the more efficient the furnace. The minimum percentage established by the DOE for furnaces is 78.
 Airflow The distribution or movement of air.
 Air Handler / Coil Blower The indoor part of an air conditioner or heat pump that moves cooled or heated air throughout the ductwork of your home. An air handler is usually a furnace or a blower coil.
 Bioaerosols Microscopic living organisms that grow and multiply in warm, humid places.
 Btu A British thermal unit is a unit of heat energy. One Btu is the amount of heat required to raise one pound of water by one degree Fahrenheit. The higher the Btu rating, the greater the heating capacity of the system.
 Btuh British thermal units per hour.
 CAE The Combined Annual Efficiency is a measure of the amount of heat produced for every dollar of fuel consumed for both home and water heating.
 Central Air Conditioning System System in which air is treated at a central location and distributed to and from rooms by one or more fans and a series of ducts.
 Compressor The part of the outdoor air conditioner or heat pump that compresses and pumps refrigerant to meet household cooling requirements.
 Condenser Coil The outdoor portion of an air conditioner or heat pump that either releases or collects heat, depending on the time of the year.
 dB A decibel is a unit used to measure the relative intensity of sound.
 DOE The Department of Energy is a federal agency responsible for setting industry efficiency standards and monitoring the consumption of energy sources.
 Ductwork The method by which air is channeled from the furnace or the blower coil throughout your home.
 Electronic Air Cleaner An electronic device that filters out large particles and bioaerosols in indoor air.
 ENERGY STAR A label attached to HVAC systems that meet or exceed the EPA guidelines for energy efficiency.
 Evaporator Coil The part of the air conditioner or heat pump that is located inside the air handler. Its primary function is to absorb the heat from the air in your house.
 Heat Exchanger Located in the furnace, the heat exchanger transfers heat to the surrounding air, which is then pumped throughout the home.
 Heat Pump A heat pump is an HVAC unit that heats or cools by moving heat. During the winter, a heat pump draws heat from outdoor air and circulates it through your home’s air ducts. In the summer, it reverses the process and removes heat from your house and releases it outdoors.
 Horizontal Flow A type of furnace, installed on its side, which draws in air from one side, heats it and sends the warm air out the other side. Ideal for attic and crawl space installations.
 HSPF The Heating Seasonal Performance Factor is the heating efficiency rating for heat pumps. The higher the rating, the more efficient the heat pump. There is no legislated minimum HSPF rating.
 Humidifier An indoor air quality device that introduces moisture to heated air as it passes from the furnace into the ductwork for distribution throughout the home.
 Humidistat An automatic device used to maintain humidity at a fixed or adjustable set point.
 HVAC Heating, Ventilation and Air Conditioning.
 MERV Rating The MERV (Minimum Efficiency Reporting Value) rating of a filter describes the size of the holes in the filter that allow air to pass through. The higher the MERV rating, the smaller the holes in the filter, the higher the efficiency.
 Micron A unit of measure equal to one millionth of a meter, or one thousandth of a millimeter.
 Scroll Compressor A specially designed compressor that works in a circular motion, as opposed to up-and-down piston action.
 SEER The Seasonal Energy Efficiency Ratio is an energy efficiency rating for air conditioners. The higher the SEER, the better the energy performance, the more you save. The DOE’s established minimum SEER rating for cooling is 10.00.
 Single Package A heating and cooling system contained in one outdoor unit.
 Split System A combination heat pump or air conditioner with indoor components, such as a furnace or blower coil. Split systems should be matched for optimal efficiency.
 Two-Stage Operation Provides two levels of heat output for greater temperature control.
 Upflow A type of furnace that draws cool air from the bottom and blows the warm air out the top into the ductwork. Designed for basement or closet installations.
 Variable Speed Motor Automatically adjusts the control of heat airflow for ultimate comfort.
 Ventilator A system that exchanges stale, recirculated indoor air with fresh, filtered outside air.